top of page

Fit

lovetony2008 · 2021-12-22T04:17:45.881Z

Brush/Swab Kit, 12-Guage Shotgun https://toboutdoors.ca is a cheap outdoors hunting gear online store Canada. we sell cheap Shooting Targets,cheap paper shooting targets.the price of hunting gear is cheap.best hunting gear for sale.gun bore mop brush. 100% cotton, Soft and washable. They are gentle and effective for Cleaning and maintaining your weapon. has a Special spiral-wound design to clean fouling, without damaging the rifling. Stainless steel loops eliminate any bristle ends that could leave scratches. provides a thorough multi-directional scrubbing action for Cleaning fouling, especially lead, out of your weapon without causing damage to the rifling. brush/swab kit includes cleaning swab, Tornado brush and Phosphor Bronze brush. The Tornado brush has a special spiral-wound design that's highly effective for cleaning bores. I recently picked up an old Stevens 520 12ga. The bore and the chamber were pretty crusty with rust, powder residue, etc. For some reason I couldn't find my 12ga cleaning kit so I ordered these brushes and the Hoppe's shotgun cleaning rod. I dipped put the tornado brush on and dipped it into some #9 solvent, ran it through the bore a few times and I was absolutely stunned with the results. Both the chamber and the barrel bore came out smooth as glass just like a brand new shotgun. I've used Hoppe's #9 for years on rifles and pistols but not on a shotgun until now. I knew I could trust the brand. Discovered thru shooting a lot of high brass buckshot and slugs, that the residue left in the barrel of my 590 (especially the first several inches from the chamber) was much heavier and thicker than that from shooting low brass birdshot. With this kit was able to completely clean and store, until next range trip, the smooth bore of my 590. After these four (brush-brush-patch-swab) steps using this kit, the bore of my 590 has a factory polished mirror like look to it. One happy shotgunner here. Start by soaking barrel for several minutes with CLP. First use the Tornado brush with heavy brass rod. The tight fit of this brush insures a good scrubbing of the heavy residue build up. Use with several passes. Soak barrel again and then use the Phosphor/Bronze brush with several passes again. Then use 3in round cotton patches attached to brush or jag with more than several passes, until patches show almost no dirty residue. Finally soak cotton Swab with CLP and with 2-3 passes, coats the barrel liberally to store for next usage. Liking it to refinishing a gun stock, starting with very coarse sand paper and finishing with a very fine sand paper. Very satisfied with the results from this kit. Highly recommended for all shotgunners. Have same kit in 45cal. Thank You. JD590. Cleaned my 12g shotgun only once with it, but it does a pretty good job. To get a full package I had to buy a rod adapter to be able to mount them on my rod and Pro-Shot 12g brass jag to wipe the barrel with cleaning patches after running brushes few times through it. I recently picked up an old Stevens 520 12ga. The bore and the chamber were pretty crusty with rust, powder residue, etc. For some reason I couldn't find my 12ga cleaning kit so I ordered these brushes and the Hoppe's shotgun cleaning rod. I dipped put the tornado brush on and dipped it into some #9 solvent, ran it through the bore a few times and I was absolutely stunned with the results. Both the chamber and the barrel bore came out smooth as glass just like a brand new shotgun. I've used Hoppe's #9 for years on rifles and pistols but not on a shotgun until now. I knew I could trust the brand. I clean mine after using and leave in a plastic jar with a screw lid to keep the smell down. They last for years. The steel tornado brush is the best for cleaning your shotgun. No need for soaking and waiting 15 minutes. Spray some cleaner and brush that sucker out. Works much better than a bore snake or a brass brush. https://www.qcne.org/profile/lovetony2008/profile https://www.corederoma.org/profile/lovetony2008/profile https://www.100bmla.net/profile/lovetony2008/profile https://www.twilightcreationsinc.com/profile/lovetony2008/profile https://www.foxyandfriends.net/profile/lovetony2008/profile https://www.visionwithwings.org/profile/lovetony2008/profile?lang=zh https://www.chilliremovals.com.au/profile/lovetony2008/profile https://www.ceestimating.com.au/profile/lovetony2008/profile

Families for Cenla

bottom of page